Model W101 Single Lane Rotary Cup Fill and Seal

Single Lane – Touch Screen

• Quick adjust height on cup drop
• 6-1/2 Gallon hopper standard
• Product inlet on hopper
• TC Port for Product Level Control Option
• Perimeter Guarding with safety interlocks
• Touchscreen HMI mounted on pack off side
• E-Stop on both sides of machine
• Variable Speed control mounted to Touch Screen Panel
• Prime/Purge functions in HMI
• Fine Tuning Filler Controls
• Fault Diagnostics
• Recipe parameter storage for different product runs
• Up to 40 Containers per minute
• Container Sizes 37mm to 115mm
• Operator friendly
• Quiet in operation
• Portable (will roll through 36″ doorway with castors)
• Compact footprint (32” x 41” x 72” high)
• Low maintenance item
• Modular construction
• Durable, lasting capital investment
• Accommodate quick parts changeovers to different sized containers

Configured into the following 6 Stations:

1. Cup load – Automatic Cup/Container denesting with height adjustment
2. Fill Station – Integrated Liquid Piston Fillers or I/O for 3rd Party Filler
3. 2nd Fill or vibrator leveling
4. Foil placement – Automatic pick & place with knockoff bell
5. Heat sealing – Single Cartridge heater head
6. Unload/discharge of filled & sealed product

Please note: The installation of these units require 220V electrical power hook up as well as 90 PSI of compressed air.

Need more capacity, check out our Modular Setup!!!

Model W201 Double Lane Rotary Cup Fill and Seal

Double Lane – Touch Screen

• Quick adjust height on cup drop
• 6-1/2 Gallon hopper standard w/ Y-Tube to feed both fillers
• Product inlet on hopper
• TC Port for Product Level Control Option
• Perimeter Guarding with safety interlocks
• Touchscreen HMI mounted on pack off side
• E-Stop on both sides of machine
• Variable Speed control mounted to Touch Screen Panel
• Prime/Purge functions in HMI
• Fine Tuning Filler Controls
• Fault Diagnostics
• Recipe parameter storage for different product runs
• Independent Lane Controls (Run either lane by itself)
• Up to 80 Containers per minute
• Container Sizes 37mm to 75mm
• Operator friendly
• Quiet in operation
• Portable (will roll through 36″ doorway with castors)
• Compact footprint (32” x 41” x 94” high)
• Low maintenance item
• Modular construction
• Durable, lasting capital investment
• Accommodate quick parts changeovers to different sized containers

Configured into the following 6 Stations:

1. Dual Cup load – Automatic Cup/Container denesting with height adjustment – two lanes
2. Fill Station – Integrated Liquid Piston Filler or I/O for 3rd Party Filler – Outboard Lane
3. Fill Station – Integrated Liquid Piston Filler or I/O for 3rd Party Filler – Inboard Lane
4. Dual Foil placement – Automatic pick & place with knockoff bell – two lanes
5. Dual Heat Sealing – Single Cartridge heater head for each lane
6. Unload/discharge of filled & sealed product

Please note: The installation of these units require 220V electrical power hook up as well as 90 PSI of compressed air.

Need more capacity, check out our Modular Setup!!!